Our
11 Step Remanufacturing Process Is One Of The Most Comprehensive
In The World. Utilizing Over 12 Years Of Experience & Know-How
We Have Struck The Best Formula For Remanufacturing Toner cartridges.
Here Is Just A Brief Description Of The Process Your Toner Cartridge
Will Go Through To Be Remanufactured & Carry The FIRST CHOICE
Name.
Gathering
Supplies: Only
The Highest Grade Quality Parts & Toner Is Chosen. We Are
Constantly Searching The Globe To Refine Our Already Industry
Leading Remanufacturing Process.
Screening cartridges:
Cartridges are examined to determine their condition.
Only those cartridges or internal parts found acceptable continue
through our remanufacturing process.
Preparing facility: At this point, the production
area is cleaned to eliminate any possibility of cross contamination
of toners used in previous production runs.
Disassembly: Each cartridge is separated into
its basic components. Even though each cartridge was previously
examined, internal parts wear at different rates and are continuously
inspected throughout the entire process.
Cleaning: Old toner, paper particles and other
debris are removed from each individual component. This is done
in a specially designed cleaning room equipped with air filtration,
vacuum, compressed air and a toner reclamation system.
Adjustments: Parts are calibrated to insure
proper mechanical performance, particularly even toner distribution.
Different cartridges use different types of toners. We only
use toners specifically formulated to be used in a particular
type of cartridge, and to be compatible with the OPC drum to
ensure exceptional print quality.
Assembly: Each component is continuously inspected
and carefully repositioned to produce a cartridge. At this time,
the cartridge does not yet bear the First Choice name.
Quality Control: Each
cartridge is then post-tested, going through painstaking procedures
to verify it's mechanical performance, print density and for
defects not previously detected, to mention a few.
Packaging: Each
approved cartridge is sealed in a protective foil bag, specifically
designed to create a shield against light, moisture and to form
an electrostatic barrier. The cartridge is suspended in Styrofoam,
egg crate end caps or other protective material and placed into
our custom printed box. The cartridge is now worthy to bear
the "First Choice" name.
Shipping: Utmost
Care Is Taking When The Cartridge Is Ready to Ship. We Only
Use UPS The World Leader In Business Class Shipping. We Ship
All Toner’s Out The Same Day There Received & Usually
Are Back In Your Hands 1-2 Days Later.
In closing: While the
process as outlined above is only a basic description of our
manufacturing process, it does not disclose other critical and
proprietary measures... Measures that is essential before being
labeled a "Genuine First Choice Toner Cartridge". |